DIRECTV error code 792

[et_pb_section fb_built=”1″ _builder_version=”3.11″][et_pb_row _builder_version=”3.11″][et_pb_column type=”4_4″ _builder_version=”3.11″ parallax=”off” parallax_method=”on”][et_pb_text _builder_version=”3.11″]

If you experience error 792 this is usually caused by severe weather conditions like storms, heavy rain, or snow.

To fix this error, you need to know what receiver you have:

HR44 and HR54 receivers with over-the-air Local Channel Connector

• Unplug the antenna from the power outlet, wait 10 seconds, and reconnect.
• Disconnect the USB connector from the receiver and reconnect.
• If the error message remains, check the local channel availability for your area at FCC.gov.

H20, HR20, or HR10-250 receivers

• Check the cable between the off-air antenna and the receiver.
• Make sure the cable isn’t frayed or damaged.
• Tighten the connections between the antenna and the Off-Air In port on the receiver.

Receivers using an external off-air tuner

• Check the cable between the Off-Air antenna and the receiver.
• Make sure the cable isn’t frayed or damaged.
• Tighten the connections between the antenna and the off-air In port on the AM21.
• Visit AntennaWeb.org to find out if off-air signal coverage is available in your area. This is a nonprofit, independent source where you can verify if you can get a clear over-the-air signal in your area. If the site indicates No OTA Signal, you may not be able to get off-air antenna channels.

[/et_pb_text][/et_pb_column][/et_pb_row][/et_pb_section]